Specifications

Table of Contents
1 General Information
Accessories 1–2
Specifications (logic analyzer) 1–3
Specifications (oscilloscope) 1–4
Specifications (pattern generator) 1–4
Characteristics (logic analyzer) 1–5
Characteristics (oscilloscope) 1–5
Characteristics (pattern generator) 1–6
Supplemental Characteristics (logic analyzer) 1–7
Supplemental Characteristics (oscilloscope) 1–10
Recommended test equipment (logic analyzer) 1–14
Recommended test equipment (oscilloscope) 1–15
Recommended test equipment (pattern generator) 1–16
2 Preparing for Use
To inspect the logic analyzer 2–2
To apply power 2–3
To operate the user interface 2–3
To set the line voltage 2–3
To degauss the display 2–4
To clean the logic analyzer 2–4
To test the logic analyzer 2–4
3 Testing Performance
To perform the self-tests 3–3
To make the test connectors (logic analyzer) 3–7
To test the threshold accuracy (logic analyzer) 3–9
Set up the equipment 3–9
Set up the logic analyzer 3–10
Connect the logic analyzer 3–10
Test the TTL threshold 3–11
Test the ECL threshold 3–13
Test the − User threshold 3–14
Test the + User threshold 3–15
Test the 0 V User threshold 3–16
Test the next pod 3–17
To test the glitch capture (logic analyzer) 3–18
Set up the equipment 3–18
Set up the logic analyzer 3–19
Connect the logic analyzer 3–19
Test the glitch capture on the connected channels 3–21
Test the next channels 3–23
v