Specifications

HP 1660C-Series, HP 1660CS-Series, and
HP 1660CP-Series Logic Analyzers
The HP 1660C-Series are 100-MHz State/500 MHz Timing Logic Analyzers.
The HP 1660CS-Series includes all the features of the HP 1660C-Series, as well as a
2-channel, 1 GSa/s oscilloscope.
The HP 1660CP-Series includes all the features of the HP 1660C-Series, as well as a
32-channel pattern generator.
Features
Some of the main features of the HP 1660C-Series Logic Analyzers are as follows:
• 128 data channels and 6 clock/data channels in the HP 1660C
• 96 data channels and 6 clock/data channels in the HP 1661C
• 64 data channels and 4 clock/data channels in the HP 1662C
• 32 data channels and 2 clock/data channels in the HP 1663C
• 3.5-inch flexible disk drive
• 540 MB hard disk drive
• HP-IB, RS-232-C, and Centronics printer interfaces
• Variable setup/hold time
• 4k states deep memory on all channels with 8k states in half channel mode
• Marker measurements
• 12 levels of trigger sequencing for state and 10 levels of sequential triggering for
timing
• 100 MHz time and number-of-states tagging
• Full programmability
• DIN mouse
• DIN keyboard support
The HP 1660CP-Series Logic Analyzers also include the following features:
• 32 channels of stimulus
• Maximum output rate of 200 MHz in half-channel mode and 100 MHz in
full-channel mode
• Memory depth of 258,048 vectors
• Support for TTL, 3-state TTL/3.3v, 3-state TTL/CMOS, ECL terminated, ECL
unterminated, and differential ECL (without pod).
ii