Instruction manual

Chapter 5 Replaceable Parts
How To Order A Part
5-4 Assembly-Level Service Guide
5
How To Order A Part
Agilent Technologies wants to keep your parts ordering process as simple and
efficient as possible. To order parts perform the following steps:
1 Identify the part and the quantity you want.
2 Determine the ordering method to be used and contact Agilent Technologies.
Parts Identification
To identify the part(s) you want, first refer to the exploded view in Figure 5-1 at the
back of this chapter or Figure 2-8A and Figure 2-8B in Chapter 2, “Service.”
When ordering from Agilent Technologies, the important numbers to note from the
Parts List are the Agilent Part Number and part-number check digit (in the “CD”
column), and the quantity of the part you want.
If the part you want is NOT identified in the guide, you can call on Agilent
Technologies for help (see the following section titled “Contacting Agilent
Technologies”). Please have the following information at hand when you contact
Agilent Technologies for help:
• Instrument Model Number (example, “Agilent 53131A”).
• Complete instrument Serial Number (example, “1234A56789”). Information
about where to find the serial number is given in the preface of this guide in the
section titled “How to Use This Guide.”
• Description of the part and its use.
• Quantity of the part required.