Instruction manual

Chapter 2 Service
Returning the Instrument to Agilent Technologies for Service
2-4 Assembly-Level Service Guide
2
To Pack in the Original Packaging Materials
Whenever possible, repack the instrument in its original packaging for shipment. In
any correspondence, refer to the instrument by the model number and complete serial
number.
1 Disconnect the power cord, probes, cables, or other accessories attached to the
instrument.
2 Make sure the folded corrugated spacer (which normally contains the manuals)
is in the box to ensure proper fitting.
3 Make sure one of the polystyrene block is in its proper position in the box.
4 Place the instrument, front panel end first, on the polystyrene block.
5 Place the other polystyrene block on top of the rear end of the instrument to
secure it.
6 Do not return the manuals with the instrument. Return an accessory only when
it is a part of the failure symptoms.
7 Seal the shipping container securely.