User guide

66 Advanced User Guide
3 Options
Keyboard and Display
Press [Options] and scroll to Keyboard and Display. Press
[Mode/Type].
The following parameters are turned on and off by pressing the
[On/Yes] or [Off/No] keys.
Keyboard lock These keys and functions are operational when
the keyboard lock is On:
[Start], [Stop], and [Prep Run]
[Load][Method] and [Load][Seq]
[Seq]—to edit existing sequences
[Seq Control]—to start or stop sequences.
Hard configuration lock On prevents keyboard configuration
changes; Off removes lock.
Key click Click sound when keys are pressed.
Warning beep Allows you to hear warning beeps.
Warning beep mode There are 9 different warning sounds that
may be selected. This allows you to give multiple GCs individual
“voices”. We suggest you experiment.
Method modified beep Turn on for high pitched beep when
method setpoint is modified.
Press [Mode/Type] to change the pressure units and radix type.
Pressure units psi—pounds per square inch, lb/in
2
bar—absolute cgs unit of pressure, dyne/cm
2
kPa—mks unit of pressure, 10
3
N/m
2
Language Select English or Chinese.
Radix type Determines the numeric separator type—1.00 or
1,00
Display saver If On, dims the display after a period of
inactivity. If Off, disabled.