User guide

4 Advanced User Guide
Cryo Trap 40
Configure the cryo trap to the GC 40
Configure a heater to the cryo trap 40
Configure the coolant 40
Configure the user-configurable heater 41
Reboot the GC 41
Front Detector/Back Detector/Aux Detector/Aux Detector 2 42
To configure the makeup/reference gas 42
Lit offset 42
To configure the FPD heaters 42
Analog out 1/Analog out 2 43
Fast peaks 43
Valve Box 44
To assign a GC power source to a valve box heater 44
Thermal Aux 45
To assign a GC power source to an Aux thermal zone 45
To configure an MSD transfer line heater 45
To configure a nickel catalyst heater 46
To configure an AED transfer line heater 46
PCM A/PCM B/PCM C 47
To assign a GC communication source to a PCM 47
To configure a PCM 47
Pressure aux 1,2,3/Pressure aux 4,5,6/Pressure aux 7,8,9 49
To assign a GC communication source to an Aux EPC 49
To configure an auxiliary pressure channel 49
Status 50
The Ready/Not Ready status table 50
The setpoint status table 50
To configure the setpoint status table 50
Time 51
To set time and date 51
To use the stopwatch 51
Valve # 52
To configure a valve 52
Front injector/Back injector 53
Solvent Wash Mode (7683 ALS) 53
To configure an injector (7683 ALS) 54
Sample tray (7683 ALS) 55
Instrument 56