User guide

356 Advanced User Guide
13 Cables
About Cables and Back Panel Connectors
Some parts of an analysis system are connected to the GC by
cables. These cables and the back panel connectors to which
they connect are described in this section.
Back panel connectors
These are the connectors on the back panel of the GC:
Sampler connectors
If using an ALS, connect to the GC using the following
connectors:
SAMPLER 1 An injector, usually the front injector. (For 7693A,
the configuration does not matter. For a the 7683, typically
configured as INJ1.)
SAMPLER 2 A second injector, usually the back injector. (For
7693A, the configuration does not matter. For a the 7683,
typically configured as INJ2.)
TRAY The sample tray and (optional) barcode reader.
The AUX connector
This connector is reserved for future development.
RS-232
LAN
REMOTE
SAMPLER 1
SAMPLER 2
TRAY
AUX
SIG 1
SIG 2
EVENT
BCD