User guide

Columns and Oven 9
Advanced User Guide 283
Multiple ramps
In a multiple- ramp program, Final time for one ramp is also Initial
time for the next ramp. Thus, there is only one Initial time.
1 Set up the first oven ramp as described in “Single ramp”.
2 Enter the rate (Rate 2) at which you want the oven
temperature to increase for the second oven ramp.
3 Enter the final temperature (Final temperature 2).
4 Enter the number of minutes (Final time 2) that you want the
oven to hold the final temperature.
5 To end the temperature program after the second ramp, set
Rate 3 to zero.
6 To add additional oven ramps, repeat the steps described.