User guide

32 Multimode Source for 6100 Series Single Quad LC/MS User Guide
2 Installation
To convert from ESI, APCI or APPI to the multimode source
Figure 17 Standard spray shield and capillary cap for ESI or APCI
10 Remove the capillary cap. If needed, moisten a clean cloth with isopropyl
alcohol and wipe the capillary cap. See Figure 18.
Figure 18 Spray shield removed.
11 Place the capillary cap back on the capillary.
12 Install the new spray shield with field shaping electrodes. See Figure 19.
Standard spray shield
Capillary cap
Capillary cap