User guide

26 Multimode Source for 6100 Series Single Quad LC/MS User Guide
2 Installation
Step 2. Install the HV control PCA and cables
6 Install the APCI HV power supply. The APCI HV power supply is located at
the end of the AUX Module.
7 Connect ribbon cable between valve PCA and Vcap/Vchamber power
supply.
Figure 11 Connecting the valve PCA to the Vcap/Vchamber power supply.
8 Connect the Vcap and Vchamber cables to the Vcap/Vchamber power
supply.
Figure 12 Connecting the Vcap and Vchamber cables to the power supply.
9 Connect the long ribbon cable, p/n G1960-60802, from the APCI HV power
supply to the valve PCA.