Technical data

16 Multimode Source for 6400 Series Triple Quad LC/MS Set-Up Guide

1 Installation

To convert from ESI or APCI to the multimode source

Figure 11 Standard spray shield and capillary cap for ESI or APCI

8 Remove the capillary cap. If needed, moisten a clean cloth with isopropyl

alcohol and wipe the capillary cap. See Figure 12.

Figure 12 Spray shield removed.

9 Place the capillary cap back on the capillary.

10 Install the new spray shield with field shaping electrodes. See Figure 13.

Standard spray shield

Capillary cap