Technical data

20 Agilent Signal Generators Programming Guide
Getting Started with Remote Operation
Preferences
Configuring the Display for Remote Command Setups (ESG/PSG)
Getting Help (Agilent MXG)
Getting Help (ESG/PSG)
For details on each key, use the Key and Data Field Reference. For additional SCPI command information, refer to the SCPI Command
Reference.
Select Update in Remote until On is highlighted.
SCPI commands:
:DISPlay:REMote ON|OFF|1|0
:DISPlay:REMote?
Using the Update in Remote softkey updates the display but not the
softkeys on each SCPI command.
In general, the softkeys are not updated until the SCPI command
SYST:DISP:GTL is sent.
For details on each key, use the key help (described in User’s Guide).
When you press Help:
Help displays for the next key you press. Use the cursor keys, Page Up, Page
Down, and the RPG knob to scroll the help text. Then press Cancel to close the
help window or press any other key to close the help window and execute that key.
For details on each key, use the key help (described in User’s Guide).
When you press Help:
Help displays for the next key you press or you see help for the next key or for
every key, depending on the Help mode.
HELP