User`s guide

Transmitting ECGs
5-2 Transmitting, Faxing, and Receiving Auto ECGs (Options
l An ECG sent to another institution for overreading or further analy-
sis.
l An ECG sent to a PC with ECG Manager software.
NOTE If you transmit an ECG from a PageWriter 300pi with ECL 09 interpretation
to either a PageWriter 200i with ECL 08 only or a TraceMaster without ECL
09 criteria, the resulting printed report will consist of ECG waveforms and
measurements only.
WARN IN G Equipment connected to the cardiograph’s RS-232 connector can cause ground leak-
age current exceeding the maximum specified in IEC 601-1 safety standards. Do not
connect any equipment to the RS-232 connector during cardiograph operation when
the patient cable is connected to a patient.
To transmit an ECG, perform the following steps:
1. Press the key. The main menu appears.