User`s guide
Recording a Manual ECG
2-10 Recording an ECG
Recording a Manual ECG
To record a Manual ECG, perform the following steps.
1. If the cardiograph is not On, press .
2. Prepare the patient and apply the electrodes.
3. Check the signal quality on all leads.
4. Enter patient ID information, if necessary.
5. Press on the front panel.
l If you did not enter a patient ID in the above step and have not
entered a patient ID since turning on the cardiograph, the message No
Requested by: Type name or number
of the person
requesting the ECG.
Alphanumeric 16
Custom Field
One:
This label can be
configured as needed.
See Table B-1.
Alphanumeric 16
Custom Field
Two:
This label can be
configured as needed.
See
Table B-1.
Alphanumeric 16
Set ECG Mgmt
Priority to Stat?
Ye s or No Setup ID entry for
ECG management
system priority to
indicate a ‘STAT’
ECG. Only applies
to cardiographs with
storage and
transmission.
3
Table 2-3: Patient ID Fields
Prompt Comments Entry
# of
char.
2Q6WDQGE\
0DQXDO