User`s guide

Patient ID Entries
B-8 Configuring Your Cardiograph
Patient ID Entries
This menu allows you to choose the patient identification entries requested
prior to recording an ECG. Table B-1 shows the patient identification entries
available for configuration. You can use Custom Label Field 1 and 2 to record
information useful to your department that is not included in the standard
Patient ID fields. For example, you may want to record patient medications
that affect cardiac function on the ECG report. You can change the field name
“Custom label 1” to “Medications”. You will be prompted to enter the
patient’s medications as you enter other patient ID information.
Use ( ) or bar to change a Ye s / N o field. Use ( ) or
to change Custom label entries.
Disabling Patient ID
To configure your cardiograph to request no ID information:
1. From the configuration menu, select Setup Patient ID Entry.
2. Press ( ) or . The Patient ID Entry menu appears.
3. Press ( ) to select No for each Yes/No field.
4. Press ( ) to erase each Custom label entry.
5. Press ( ) until you return to the Idle screen, or once to save
the configuration.
NOTE The patient age, sex, height, and weight affect the interpretation of the ECG
and are needed by the Predictive Instruments application of the PageWriter
300pi. For the most accurate interpretation, they should be included in the
patient ID entry. At a minimum, age and sex should be entered.
Change
)
6SDFH
Erase
)
%DFN
Select
)
Change
)
Erase
)
Exit
)
6WRS