User`s guide

The Keyboard and Front Panel

PageWriter 200/300pi M1771A/1770A Cardiograph 1-5

Displays the configuration menu, unless an ECG report is in-process. Use ,

, or to return to the normal ECG display.

% These five keys (F1 – F5), located directly beneath the display window, perform different

functions at different times. They are called “softkeys.” When a softkey is active, a label

describing its function is displayed above it on the screen. Press the key to perform the

function displayed on the screen.

& Used to enter shifted characters.

' Allows patient identification entry, review, and edit.

( Turns filters on and off. The filter or filters controlled by this key are selected during car-

diograph configuration.

) ²&KDU Enters the upper case letters and punctuation marks shown above the number keys when

you press the corresponding letter or number key while pressing the key.

*$& This indicator is lighted when the power cord is plugged into an active wall outlet. This

also indicates that the battery is charging.

+ The Enter key.

, This key starts an Auto ECG recording.

- Starts a Manual ECG recording. Also restores the ECG trace during a Manual report after

defibrillation.

. Halts any cardiograph activity and restores the normal ECG display.

/ Prints a copy of the last Auto ECG.

0 Advances the paper to the beginning of the next page.

1 

To view lead groups, use the or keys to move to the next lead group, and the

or keys to move to the previous lead group. The or keys move the cursor

down on configuration displays and patient ID information screens. The and

keys move the cursor up.

2 Used to enter alternate characters. (See item P.)

3 –&KDU To enter the characters shown above the letter keys (see Table 1-1 for language-specific

keys), press the key with the desired letter.

4 Switches the cardiograph between On and Standby. Standby means the cardiograph is

off, but charging the battery, when it is plugged in to AC power.

Exit

Stop

softkey

Shift

Filter

Shift

Auto

Manual

Stop

Copy

Page

Alt

On/Standby