User`s guide
Setting Up the Telephone Directory (Options #A05 or
PageWriter 200/300pi M1771A/1770A Cardiograph A-17
A
and then dial the telephone number to place a call outside your house
telephone system.
l P: indicates pulse dialing (with a dial), instead of tone (with a key-
pad).
For example, if you are using a pulse telephone with your modem,
and your house telephone system requires dialing a 9 before placing
an outside call, you would enter the telephone number as:
P9W555,333,4444
NOTE See your modem documentation for more details on special dialing com-
mands.
5. Move the cursor to the Type field. Select the transmission type by press-
ing ( ) until the appropriate transmission type appears.
The transmission type specifies the way the cardiograph will send the
ECG. Fax specifies sending the ECG to a facsimile machine. Modem
specifies sending the ECG over a telephone line. Direct specifies con-
necting the cardiograph to TraceMaster using a data cable. SCP stands for
Standard Communications Protocol.
6. Move the cursor to the Speed field. Select the transmission speed by
pressing ( ) until the appropriate transmission speed appears.
See Table A-1 for recommended transmission speeds.
Change
Type
)
Change
)