User`s guide

Transmitting or Faxing ECGs by Modem (Options #A05 or StressWriter only)
A-14 Setting Up Your Cardiograph
Before using the M1706B modem, you must connect the cables. Figure A-9
shows how to connect the cables for transmitting ECGs using a modem.
Figure A-9: Connecting the Modem Cables
A. PageWriter 200/300pi cardiograph
B. Modem power cord
C. Modem (M1706B, U.S. only application)
D. Modem data cable (DB9F/DB25M serial modem cable
1
)
E. Phone line connector
NOTE The following instructions support only the M1706B, U.S. only modem. In
all other cases, you must consult the instructions for your locally purchased,
country specific modem.
To setup the cardiograph for transmission, refer to Figure A-9 and perform the
following steps:
1. Turn the cardiograph off.
1. Quick-disconnect cabling is available from Agilent Technolgies which allows
you to quickly switch between connection to a modem and direct connection
to a TraceMaster, PC or another cardiograph. Refer to the PageWriter 200/
300pi sales literature.