User`s guide

PageWriter 200/300pi M1771A/1770A Cardiograph 7-1
7
7 Maintaining the Cardiograph
Care and Cleaning
The outside surfaces of the cardiograph and its accessories (except the patient
cable) are designed to be cleaned by mild soap and water or isopropyl alcohol.
The patient cable can be cleaned only with mild disinfectant or soap and
water. The patient cable cannot be cleaned with isopropyl alcohol.
Cleaning the Cardiograph
1. Unplug the power cord and ensure that the cardiograph is in Standby
mode (the display is off).
2. Wipe the external surfaces of the cardiograph with a soft cloth dampened
with mild soap and water or isopropyl alcohol. Avoid applying cleaning
fluids to cable connectors.
CAUTION Do not use any strong solvents or abrasive cleaning materials.
Do not spill any liquids on the surface of the cardiograph. Immediately have
the cardiograph serviced if any liquids spill on the surface of the cardiograph.
Do not use the following to clean the cardiograph:
• Acetone
• Iodine-based cleaners
• Phenol-based cleaners
• Ethylene Oxide Sterilization
• Chlorine bleach
• Ammonia-based cleaners