User`s guide

Receiving ECGs
5-8 Transmitting, Faxing, and Receiving Auto ECGs (Options
6. Move the cursor to the Speed field. Select the transmission speed by
pressing ( ) until the appropriate transmission speed appears.
See Table 5-1 for recommended transmission speed.
7. Press ( ) to save your changes and return to the previous menu.
Receiving ECGs
Your cardiograph can receive ECGs from a remote device whenever it is
turned on, idle, and properly configured. If the cardiograph or modem is
turned off, or if the connection speed does not match that of the sending
device, the cardiograph cannot receive ECGs. You can also request transmis-
sion of an ECG from a TraceMaster ECG Management System. All ECGs are
printed as they are received, using the format with which they were sent. You
cannot edit, reinterpret, or store received ECGs.
Receiving ECGs sent by a Remote Device
Your cardiograph will receive and print ECGs transmitted from a TraceMaster
ECG Management system, another PageWriter 200/200i/300pi cardiograph
Table 5-1: Remote Sites and Transmission Types
Remote Site Transmission Type
Recommended
Speed
TraceMaster Modem
Direct
2400
9600
Pagewriter XLi Modem 2400
PageWriter 200/200i/
300pi
Modem 2400
Group III Facsimile
Machine
Fax 19200
PC with ECG Manager
software
ModemSCP
DirectSCP
57600
57600
Change
)
Done
)