User manual

Transmitting or Faxing ECGs by Modem

A-9

Appendix A Setting Up

Your Cardiograph

8Transmitting or Faxing ECGs by Modem

You can also use a modem to transmit or fax ECGs by telephone to the Agilent

M1765A ECG Manager, or to a group III fax machine.

Before using the modem you must connect the cables. The following figure shows

how to connect the cables for transmitting ECGs using a modem.

Figure A-6 Connecting the Modem Cables

A. M2662A cardiograph

B. Modem power cord

C. Modem

D. Modem data cable (DB9F/DB25M serial modem cable)

E. Phone line connector

Refer to Figure A-6 and perform the following steps:

1. Turn the cardiograph off.

2. Turn the modem power switch off.

3. Insert the 9-pin female subminiature D connector end of the modem data cable

into the RS-232 connector on the back of the cardiograph.

* Data transmission cable is available from Agilent Technologies (M1706B Option #J05).

RS 232

TO PHO

8.5