User manual

Connecting the Direct Transmission Cable

A-7

Appendix A Setting Up

Your Cardiograph

8Connecting the Direct Transmission Cable

You can transmit ECGs directly to the Agilent M1765A ECG Manager by directly

connecting the cardiograph to the ECG Manager system. Perform the following

steps to connect the direct transmission cable.

1. Plug one end of the direct transmission cable into the cardiograph connector

labeled RS232. Turn the thumb screws to secure the cable.

2. Plug the other end of the direct transmission cable into the COM (serial) port of

the PC. Turn the thumb screws to secure the cable.

3. To transmit the ECG, use the Send function from the Transmit and Fax ECGs

menu. Select DirectSCP as the Transmission type. Refer to the instructions in

Chapter 6, Transmitting ECGs, for more information.

Figure A-5 Connecting the Direct Transmission Cable to a PC

A. M2662A cardiograph

B. Transmission cable

C. Computer

If non-Agilent recommended data transmission cable is used, the cardio-

graph may not meet the Radiated Emission Standard found in CISPR 11.

* Data transmission cable is available from Agilent Technologies (M1706B Option #J08.)

MOUSE

POWER

KEYBOARD

RS 232

COM

WARNING