User manual

Connecting the Cables
A-4
Do not remove the “Do not Remove!” sticker. Otherwise the warranty will be void.
8Connecting the Cables
1. Plug the patient cable into the patient cable connector of the cardiograph, as
shown below.
2. Turn the thumb screws to secure the cable.
3. Plug one end of the AC/DC Power Adapter into the yellow power connector of
the cardiograph. Plug the other end of the AC/DC Power Adapter into the power
cord.
4. Plug the power cord into a wall outlet.
Figure A-3 Connecting the Power Adapter and Patient Cable
A. Patient Cable
B. AC/DC Power Adapter
CAUTION
A
B