User manual

Notice

vi Revision 0.1

0Notice

The material contained in this document is subject to change without notice.

Agilent Technologies makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and fitness

for a particular purpose. Agilent Technologies Inc. shall not be liable for errors

contained herein or for incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

This document contains proprietary information which is protected by copyright,

patent, trademark, trade secret and/or other intellectual property rights. All rights are

reserved. No part of this document may be reproduced in any form or by any means

(including electronic storage and retrieval or translation into a foreign language)

without prior agreement and written consent from Agilent Technologies Inc.

Before using the instrument, read this guide and become thoroughly familiar with

the contents.

Responsibility of the Manufacturer

Agilent Technologies only considers itself responsible for any effects on safety,

reliability, and performance of the equipment if:

assembly operations, extensions, re-adjustments, modifications, or repairs are

done by persons authorized by Agilent Technologies, and

the electrical installation of the relevant room complies with the IEC or national

requirements, and

the instrument is used according to the instructions for use presented in this man-

ual.

The Agilent Technologies warranty is only assured if you use Agilent Technologies

approved accessories and replacement parts.