User manual

Storing ECGs
5-2
4Storing ECGs
To store the ECG, perform the following steps:
1. After an ECG is acquired or printed, the following message will appear on the
screen:
2. Press (F1) to store the ECG or (F5) to continue without storing the
ECG. If you select , you cannot store or transmit the ECG later.
3. If you select , the message “Storing ECG...” appears on the screen
until storage is complete.
4. If the storage memory is full when you attempt to store an ECG, the following
screen appears:
Yes No
Store ECG?
F1 F2 F3 F4 F5
Patient ID: 000301001
Yes
No
No
Yes
Yes No
Storage System is full,
do you want to delete
an old ECG?
F1 F2 F3 F4 F5