User manual
4-1
Chapter 4: Configuring
Your Cardiograph
4 Configuring Your Cardiograph
Your cardiograph may be customized to meet your particular requirements. This
chapter describes how to navigate the menus and configure your cardiograph.
3Adjusting Display Screen Contrast
Hold the key and press the or key to darken or lighten the contrast on
the cardiograph display.
3Navigating the Configuration Menus
Use the following techniques to navigate the configuration menus:
1. To select from the Configuration Menu, press or to move the cursor
down, or press or to move the cursor up until the desired menu line is
highlighted.
2. Depending on what is highlighted, the F3 key changes from to
.
3. Press (F3) to change the ECG filters or ID entry setup.
4. Press (F3) to display the Set Date and Time menu.
Select
Change
Change
Select