Specifications
$JLOHQW0$996HULHV6HUYLFH*XLGH
7HVWLQJ0DLQWDLQLQJWKH$JLOHQW996HULHV
Testing & Maintaining
the Agilent V24/V26
Series
Chapter 2 Testing & Maintaining the Agilent V24/V26
Series
The first section in this chapter, “Test and Inspection Requirements”, describes the
procedures required to ensure that the Agilent V24/V26 Series monitor is in safe
working order. The following sections describe recommended procedures for
maintaining the equipment. These procedures apply to all versions of the Agilent V24/
V26 Series except as stated.
The procedures are grouped as follows:
• Test and Inspection Requirements — safety tests and periodic preventive
maintenance
• Performing General Inspections of the System
• Cleaning Procedures
• Performing Accuracy and Calibration Procedures
Objectives
In order to meet the chapter’s goals, you should be able to:
• Perform required safety checks and maintenance procedures.
• Perform a general inspection of the system.
• Clean the major units of the system.
Concepts
The V24/V26 Series has different levels of preventive maintenance and checks that
should be performed on a periodic basis or as recommended.
The procedures described in this chapter should be performed at the specified time
intervals to ensure effective preventive maintenance. The checklist may be
photocopied, completed by the maintainer, and filed for reference.