Specifications

$JLOHQW0$996HULHV6HUYLFH*XLGH
8VLQJ6XSSRUW )XQFWLRQV
Using
Support Functions
The following types of modules support Settings Transfer:
• All modules with
7 marked on the front panel
• The Pressure, C.O., CO
2
and Temperature Modules (also without the 7 mark).
The ECG and ST applications have settings stored in the ECG and ECG/RESP modules
respectively.
The instrument retains the labels of the multiple Module Setup, such as Temperature or
Pressure. This Label Tracking feature is only active if Settings Transfer is set to Yes.
The parameter application software stores a label identifier. This allows the system to match
the stored label with the parameters' set default label.
6HWWLQJWKH$OWLWXGH
An adjustment for altitude must be entered before using the CO
2
and tcpO
2
/CO
2
Module.
This is because the algorithm adjusts the measurement according to altitude. The altitude
setting is made in the Global Switches task window.
6HWWLQJWKH'DWHDQG7LPH
This facility allows you to set the system date and time. If the equipment is connected to the
SDN Network, the date and time are set automatically by the Network.
Set the date and time as follows:
 Press the hardkey. The Monitor Setup selection window will appear.
 Press the softkey. The screen displays the Date and Time screen.
 Change the day, month, year, hour and minute as required by pressing the corresponding
softkeys.
 Press after all the adjustments have been made. A message appears with the
new date and time settings.
 Press the hardkey to return to the Monitor Setup menu.
'LVSOD\LQJWKH6WDWXV/RJ
The Status Log contains error messages reported by the monitor either during the boot
process or during operation. This information can be accessed in either Monitoring Mode or
Service Mode.
Monitor Setup
'DWH7LPH
Confirm
Monitor Setup