User`s guide

315
13 Custom Digital Modulation (Option 431)
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 43 and familiarize yourself with the information in that
chapter.
This feature is available only in Agilent X- Series vector signal generators with Option 431. Option 431
requires Option 653 or 655 (N5172B) or Option 656 or 657 (N5182B).
• Custom Modulation on page 316
• Creating and Using Bit Files on page 324
• Using Customized Burst Shape Curves on page 330
• Using the Arbitrary Waveform Generator on page 337
• Using Finite Impulse Response (FIR) Filters with Custom Modulation on page 353
• Modifying a FIR Filter Using the FIR Table Editor on page 359
• Differential Encoding on page 362