User`s guide

92 Chapter 3
Setting Measurement Conditions
Setting Window Displays
Step 5. Press the softkey corresponding to the item for which you want to set the display color.
Step 6. Press
Red.
Step 7. Select the amount of red (R) from
0 to 5.
Step 8. Press
Green.
Step 9. Select the amount of green (G) from
0 to 5.
Step 10. Press
Blue.
Step 11. Select the amount of blue (B) from
0 to 5.
Resetting the display colors to the factory state
You can reset the display colors in normal display and inverted display to the preset factory
state.
The selection procedure is as follows:
Step 1. Press .
Step 2. Press
Misc Setup.
Step 3. Press
Color Setup.
Step 4. Press
Normal (for normal display) or Invert (for inverted display).
Step 5. Press
Reset Color.
Step 6. Press
OK.
Softkey Function
Data Trace 1 to 9 Specifies the data trace of traces 1 to 9
Mem Trace 1 to 9 Specifies the memory trace of traces 1 to 9
Graticule Main Specifies the graticule label and the outer lines of graphs
Graticule Sub Specifies the grid of graphs
Limit Fail Specifies the fail display in the limit test result
Limit Line Specifies the limit line
Background Specifies the background