User`s guide

86 Chapter 3
Setting Measurement Conditions
Setting the Scales
Figure 3-11 Manual scale setup on a rectangular display format
Manually setting scales on a rectangular display format
Step 1. Press (or ) and (or ) to select the trace for
which scale features will be adjusted.
Step 2. Press .
Step 3. Press the softkey that corresponds to the particular feature that needs to be adjusted.
NOTE It is also possible to turn off the display of graticule labels. For details, refer to “Turning off
the display of graticule labels” on page 88.
Softkey Function
Divisions Defines the number of divisions on the Y-axis.
Scale/Div Defines the number of increments per division
on the Y-axis.
Reference Position Defines the position of the reference line.
Reference Value Defines the value corresponding to the
reference line.