User`s guide

Appendix D 721
Softkey Functions
Sweep Setup Menu
D. Softkey Functions
(Continued)
Frequency Offset
External Source
Offset
Set the offset for the base frequency
*2
.
:SENS{1-16}:OFFS:LOC:OFFS
Start
Set the start frequency.
:SENS{1-16}:OFFS:LOC:STAR
Stop
Set the stop frequency.
:SENS{1-16}:OFFS:LOC:STOP
Control
Turns on/off of the external signal source control with GPIB.
:SENS{1-16}:OFFS:LOC:CONT
Power
Set the power level.
:SENS{1-16}:OFFS:LOC:POW
Slope [xdB/GHz]
Set the power slope.
:SENS{1-16}:OFFS:LOC:POW:SLOP
Slope [ON/OFF]
Turns on/off of the power slope.
:SENS{1-16}:OFFS:LOC:POW:SLOP
:STAT
Return
Returns to the softkey display screen one level higher.
Avoid Spurious Turns on/off of the avoid spurious.
:SENS{1-16}:OFFS:ASP
X-Axis
Displays the softkey to select the x-axis frequency data.
Base
Selects base frequency
*2
when the frequency offset turns on.
:CALC{1-16}:OFFS:XAX
Stimulus
Selects source port frequency when the frequency offset turns on.
:CALC{1-16}:OFFS:XAX
Response
Selects receiver port frequency when the frequency offset turns on.
:CALC{1-16}:OFFS:XAX
Normal
Selects base frequency
*2
when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
RF + LO
Selects RF+LO frequency when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
RF - LO
Selects RF-LO frequency when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
LO - RF
Selects LO-RF frequency when the frequency offset turns off.
:CALC{1-16}:MIX:XAX
Cancel
Returns to the softkey display screen one level higher.
Return Returns to the softkey display screen one level higher.
Return Returns to the “E5070B/E5071B Menu (Top Menu)” on page 650.
*1.Only with Options 214, 314, and 414.
*2.The base frequency is the frequency that is set by using and keys.
Key Operation Function SCPI Command