User`s guide

578 Chapter 17
Measurement Accessories
System Accessories
System Accessories
System Racks and Cases
CAUTION When installing the Rack mount/handle kit (Option 1CP), please follow the prescribed
procedure, or it could result in damage the instrument.
Please refer to the Installation and Quick Start Guide chapter 2, “how to Install the
Rack-mount and Handle Kit (Option 1CP)” for more detail.
GP-IB Cables
The following GPIB cables can be used to connect the analyzer with an external device
such as a computer.
10833A GPIB cable 1.0 m (3.3 ft)
10833B GPIB cable 2.0 m (6.6 ft)
10833C GPIB cable 3.0 m (9.9 ft)
10833D GPIB cable 0.5 m (1.6 ft)
82357A/B USB/GPIB Interface
The 82357A/B can be used to connect the E5070B/E5071B with an external device
controlled by the E5070B/E5071B.
NOTE 82357B USB/GPIB interface can not be used if not the c drive volume label in hard disk is
more than CP810. When use the 82357B USB/GPIB interface, hard disk is requred to
change.
Option Agilent Cat. No. Description
Option 1CN 5063-9229 Handle kit (two handles)
Option 1CM 5063-9216 Rack mount kit (without handles)
Option 1CP 5188-4430 Rack mount/handle kit
E3663AC Rack mount rail kit (with a rack mount
kit and a handle kit)
9211-2658 Transit case