User`s guide

Chapter 17 569
Measurement Accessories
Calibration Kits
17. Measurement Accessories
Calibration Kits
Calibration kits are used to improve the accuracy of the analyzer in various measurements.
Two types of calibration kit – the coaxial mechanical calibration kit and coaxial electronic
calibration kit – are available. Each kit comes with N type connectors or 3.5 mm (SMA)
connectors.
The electronic type reduces the time required for calibration, mis-connections, and wear on
connectors since it requires fewer changes of connection than the mechanical type.
Specifications for calibration kits and the availability of particular calibration kits are
subject to change without prior notice. Contact the nearest Agilent Technology sales office
or the supplier of your analyzer for more information before placing an order.
For Devices with N Type Connectors
Coaxial Mechanical Calibration Kits
85032F Mechanical Calibration Kit N Type 50 Ω (30 kHz ~ 9 GHz)
The 85032F kit includes the following items.
Also, the following options are available for the 85032F.
Agilent Cat. No. Description
85032-60017 50 Ω N type (m), terminated
85032-60018 50 Ω N type (f), terminated
85032-60013 50 Ω N type (m), open
85032-60014 50 Ω N type (f), open
85032-60016 50 Ω N type (m), short
85032-60015 50 Ω N type (f), short
Option Agilent Cat. No. Description
Option 100 85032-60021 With a 50 Ω N type (f)-(f) adaptor.
Option 200 85032-60019 With a 50 Ω N type (m)-(m) adaptor.
Option 300 85032-60020 With a N type (m)-(f) adaptor.
Option 500 85054-60001 With two 50 Ω N type (f) to 7 mm
adaptors.
85054-60009 With two 50 Ω N type (m) to 7 mm
adaptors.