User`s guide

Chapter 13 453
Setting and Using the Control and Management Functions
Setting the preset function
13.Setting and Using the
Control and Management
Functions
Setting the preset function
Showing/hiding the confirmation buttons when presetting
The preset function can be executed without displaying the OK and Cancel softkey buttons
when pressing the preset button of the E5070B/E5071B.
Operational procedure
Step 1. Press .
Step 2. Press
Misc Setup.
Step 3. Press
Preset Setup.
Step 4.
Confirm to toggle on (show)/off (hide) the confirmation buttons.
Setting the user preset function
You can save the instrument state of the E5070B/E5071B into a file in the mass storage,
and then recall it with the preset function to reproduce that state.
If no user preset instrument state is stored, you cannot set the user preset function. For
more information on saving instrument states, see “Saving a user-preset instrument state”
on page 454.
Operational procedure
Step 1. Press .
Step 2. Press
Misc Setup.
Step 3. Press
Preset Setup.
Step 4. Press
State.
Step 5. Use one of the following keys for the desired setting.
Table 13-3
Softkey Function
Factory Specifies the normal preset function.
User Specifies the user-preset function.
Cancel Returns to the softkey display in one upper level.