User`s guide

Chapter 13 441
Setting and Using the Control and Management Functions
Configuring the Network
13.Setting and Using the
Control and Management
Functions
Step 8. In the Internet Protocol (TCP/IP) Properties dialog box, click the OK button (6 in Figure
13-15).
Step 9. In the Local Area Connection Properties dialog box, click the
OK button (3 in Figure
13-14).
Step 10. In the Local Area Connection Status dialog box, click the
Close button (3 in Figure 13-13).
Step 11. Click the × button (2 in Figure 13-12) in the upper right of the Network and Dial-up
Connections window.
Specifying computer name
Follow these steps to specify the computer name:
Step 1. Press .
Step 2. Press
Misc Setup.
Step 3. Press
Network Setup.
Step 4. Press
Network Identification.
Step 5. The System Properties dialog box (Figure 13-16) appears. Click the
Properties button (1
in Figure 13-16).
Figure 13-16 System Properties dialog box