User`s guide

440 Chapter 13
Setting and Using the Control and Management Functions
Configuring the Network
Step 6. The Local Area Connection Properties dialog box (Figure 13-14) appears. Select
(highlight)
Internet Protocol (TCP/IP) (1 in Figure 13-14) and then click the Properties
button (2 in Figure 13-14).
Figure 13-14 Local Area Connection Properties dialog box
Step 7. The Internet Protocol (TCP/IP) Properties dialog box (Figure 13-15) appears. Click (select)
Use the following IP address (1 in Figure 13-15) and then enter the IP address (2 in
Figure 13-15), the subnet mask (3 in Figure 13-15), and the gateway address (4 in Figure
13-15).
If the IP address can be obtained automatically (if the DHCP server can be used), click
(select)
Obtain an IP address automatically (5 in Figure 13-15).
Figure 13-15 Internet Protocol (TCP/IP) Properties dialog box