User`s guide

Chapter 13 439
Setting and Using the Control and Management Functions
Configuring the Network
13.Setting and Using the
Control and Management
Functions
Step 6. When switching from disable to enable:
Double-click the Local Area Connection icon (1 in Figure 13-12) in the Network and
Dial-up connections window to enable the network connection function.
When switching from enable to disable:
Double-click the Local Area Connection icon (1 in Figure 13-12) in the Network and
Dial-up Connections window. The Local Area Connection Status dialog box (Figure
13-13) appears. Click the
Disable button (1 in Figure 13-13) to disable the network
connection function.
Figure 13-13 Local Area Connection Status dialog box
Step 7. Click the × button (2 in Figure 13-12) in the upper right of the Network and Dial-up
Connections window.
Setting IP address
Follow these steps to set the IP address:
Step 1. Press .
Step 2. Press
Misc Setup.
Step 3. Press
Network Setup.
Step 4. Press
Network Configuration.
Step 5. Double-click the Local Area Connection icon (1 in Figure 13-12) in the Network and
Dial-up Connections window. The Local Area Connection Status dialog box (Figure
13-13) appears. Click the
Properties button (2 in Figure 13-13).