User`s guide

434 Chapter 13
Setting and Using the Control and Management Functions
Setting the Internal Clock
Figure 13-7 Date/Time Properties Dialog Box (“Time Zone” Tab)
Step 7. In the drop-down list box select a time zone.
Step 8. To make the summertime setting automatically, check
Automatically adjust clock for
daylight saving changes
to assign the check mark (√) to it.
Step 9. Press the
OK button.
Setting the Date/Time Display ON/OFF
The date/time display in the instrument status bar can be switched on/off using the
following procedure.
Step 1. Press .
Step 2. Press
Misc Setup.
Step 3. Press
Clock Setup.
Step 4. Press
Show Clock to switch the date/time display on/off.