User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 1- 81

Main GUI

Switching Matrix Operation Panel

Not available for the B1505A. The Switching Matrix Operation Panel is opened by

clicking the Switching Matrix button, and is used to create the switch setup for

Agilent B2200A/B2201A/E5250A switching matrix, send the setup to the switching

matrix, and so on. The switch setup can be saved to the switch setup preset group.

This group is different from the preset group for test setups.

Switch Setup This area is used to create the switching matrix switch setup. You can create the

setup by clicking the Input-Output cross point. The switch setup can be sent to the

switching matrix by clicking the Apply Switch Setup button.

Setup Name Name of switch setup

Clear All Sets all cross point open.

Input Shows the switching matrix input port and the measurement

resource connected to it. This information is set in the

“Configuration”.

Label Shows the label set to the measurement resource. The label is

set in the application test definition or the classic test setup.

ALL Checking this box sets all of this line to close.

Unchecking this box sets all of this line to open.

This box is gray and have a check when a cross point in this line

is set to close.

Output Output channels 1 to 12, 24, 36, or 48. Available numbers

depend on the number of the matrix cards installed in the

switching matrix. The field below the channel number is used to

enter the label for the output channel.

Export to Current

My Favorite Group

This button converts the switch setup to the switching matrix setup data format of

the classic test, and saves it to the present My Favorite Setup group.

Color of cross point Switch setup

green close

gray open