User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 1- 49
Main GUI
Quick Test
Preset Group Selects the preset group to open.
Setup Name Lists all test setups saved in the preset group.
To select the test setup for the quick test setup operation, click the line. For multiple
selection, use ctrl-click, shift-click, or Select All.
When you are doing the quick test setup, the softkeys are available to start the
associated test. The softkey label will show the Setup Name.
Quick Test List The following buttons are available for the quick test setup operation.
Select All Selects all test setup in the test setup list.
Execution on/off The button is effective for the selected test setup and is used
to enable/disable execution of the tests. Once the quick test is
started, only the tests marked with
will be executed in order
from top to bottom of the test setup list.
Data save on/off The button is effective for the selected test setup and is used
to enable/disable data save of the tests. The data save will be
performed only for the tests marked with
.
Up Moves the selected test setup upward
Down Moves the selected test setup downward.
Recall Recalls the selected test setup. The screen is changed to
Application Test or Classic Test.
Rename You can change the name of the selected test setup.
Duplicate Creates a copy of the selected test setup and places it at the
bottom of the test setup list.
Delete You can delete the selected test setup.