User`s guide

1- 48 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1

Main GUI

Quick Test

In the quick test mode, you can execute the test setups saved in a preset group (My

Favorite Setup) sequentially. The EasyEXPERT main screen has the following

additional graphical user interface.

My Favorite Setup The following menu is displayed by clicking this button.

Cancel Closes this menu.

Duplicate This

Preset Group

Opens the Duplicate Preset Group dialog box. Creates a copy of

the present preset group and saves it as the specified name.

Import Preset

Group...

Opens the Preset Group Import dialog box. Imports the

specified preset group.

Export Preset

Group...

Opens the Preset Group Export dialog box. Exports the present

preset group as the specified name.

Organize Preset

Group

Opens the Organize Preset Group dialog box used to organize

the preset group. See

“Organize Preset Group” on page 1-56.

NOTE

If the preset group contains a tracer test setup

The tracer test setup is converted to and recalled as a Multi Channel I/V Sweep test

setup.

In this conversion process, the VAR1 dual polarity sweep setup (Dual Polarity) is

ignored. The setup of the positive sweep from start to stop is converted, but the

setup of the negative sweep from -start to -stop is not converted.

NOTE

The conversion rule for the hold time settings

The VAR1 hold time setup (Hold Time) is converted and used, and the VAR2 hold

time setup (Hold Time) is ignored.