User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 1- 43
Main GUI
Tracer Test
Data names set in the V Name and I Name fields of the channel area are used to
specify the target monitored signals.
During executing the tracer test, the waveforms within the specified duration are
displayed in this window graphically. The display resolution is 2 s.
Oscilloscope View Window GUI
The Oscilloscope View window provides the following GUI. See Figure 1-1.
Figure 1-1 Oscilloscope View Window
File menu Provides the following function.
Save Setting Saves the setup data for waveform monitor. The setup data is
saved as a part of the tracer test setup.
Save Data As... Opens the Save Waveform Data dialog box used to specify the
file name of the displayed waveform data to save.
Available data formats are the Text (tab separated), CSV, XML
spreadsheet, BMP (bitmap image), EMF (enhanced metafile),
GIF image, and PNG image.
Close Closes the Oscilloscope View window.
Data menu Lists all the names of voltage/current output data set in the present tracer test with
serial numbers.
Checking a data name enables to monitor the signal corresponding to the data name,
and display the waveform in the Oscilloscope View window. If not checking, the
waveform for the data name is not displayed in the Oscilloscope View window.
Setup menu Provides the following functions.
Marker position
Data at Marker position
Marker Time/division
Vertical data/division and offset value
Duration of measurement
Time origin