User`s guide

1- 32 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Main GUI
Tracer Test
Add Adds a row of the channel setup by selecting a SMU listed in
the menu displayed by clicking this button.
Delete Deletes the selected channel setup.
Up / Down Moves the selected channel setup upward or downward.
Unit Measurement resource used for the source output or
measurement
V Name Variable name of voltage output or measurement data
I Name Variable name of current output or measurement data
Mode Output mode. V (voltage), I (current), VPULSE (voltage pulse),
or IPULSE (current pulse).
Function Output function, VAR1 (primary sweep), VAR2 (secondary
sweep), or CONST (constant)
To select a channel setup, use the left radio button of the channel setup. If multiple
output channels are defined, the channels start output sequentially. The order is top
to bottom of the channels defined in this screen. The output stops in the opposite
order.
Sample setups Clicking this button displays the sample setup menu. Clicking a setup name applies
its setup to the tracer test environment.
The B1500A provides the following sample setups.
• MOSFET: ID-VDS, ID-VGS, ID(off)-VDS, BVDSS
• Diode: IF-VF, IR-VR
• BJT: IC-VCE, IC-VCEO, BVCEO
The B1505A provides the following sample setups.
• MOSFET: ID-VDS, ID-VGS, ID(off)-VDS, BVDSS
• Diode: IF-VF, IR-VR
• IGBT: IC-VCE, IC-VGE, IC(off)-VCE, BVCES
• BJT: IC-VCE, IC-VCEO, BVCEO, IC-VCBO, BVCBO
• GaN FET (N1267A): ID-VDS, ID(off)-VDS, ID-VDS Current Collapse, FET
Current Collapse Oscilloscope View
• GaN Diode (N1267A): IF-VF, IR-VR, IF-VF Current Collapse, Diode Current
Collapse Oscilloscope View