User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 1- 31

Main GUI

Tracer Test

In the tracer test mode, you can start I/V sweep measurement easily and quickly by

setting up the I/V Trace screen only. The EasyEXPERT main screen has the

following additional graphical user interface.

Setup Name Used to set the name of test setup. The name must be the identification for the test

setup saved to a My Favorite group (preset group). Enter a unique name that is

distinct from other setup.

The name is recorded in the test result data and is used to differentiate the data in the

test record list area.

Graph area This area displays measurement result graph and provides “Graph Setup Tool” and

“Option Tool” for setting and changing the graph display.

Mouse drag operation zooms in the graph. To set the graph maximum or minimum

value directly, use the entry field displayed by clicking the value on the graph.

Channel area This area defines the channel setups and the variables for the channel output data

and the measurement data.