User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 1- 23
Main GUI
Main Screen
Test Result Editor
The Test Result Editor appears when measurement is completed or by clicking
Results > Edit > Flag & Remarks. This is used to set a flag and remarks to the
associated test record and provides the following GUI.
Save, Delete Divides test records into groups, Save and Delete.
Test records in Save-group are always listed in the lower area of the EasyEXPERT
main screen.
Test records in Delete-group can be listed while Results > Filter >
Show
Deleted Data is checked.
Flags The following buttons are available. You can set one of the following flags.
• Important ! button
Sets the important flag (!) to the test record.
• Valid # button
Sets the valid flag (#) to the test record.
• Questionable ? button
Sets the questionable flag (?) to the test record.
Remarks You can enter characters into this field. The characters will be recorded as the
Remarks value of the test record.
OK Applies the setup on the Test Result Editor, and closes this dialog box.
Test Results Data Filter
This dialog box appears by clicking Results > Filter > Filter... and is used to specify
the test records listed in the lower area of the EasyEXPERT main screen.
Data records in
Save-group
Check this box to list the test records in Save-group.
Data records in
Delete-group
Check this box to list the test records in Delete-group.
Flag Select or enter a flag in this field to list the test records with the specified flag.