User`s guide

1- 20 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Main GUI
Main Screen
When the automatic data record function is enabled, one test execution result is
stored in one test record. For the classic test, one test result is stored in one test
record. For the application test, all test results taken by executing one
application test are stored in one test record. However, the automatic data export
function using the Text File type exports the file for each test result.
Table 1-1 Record Test Result Data Automatically Check Box and Data Record Functions
• Allocate Data Display for each test
This check box sets the Multi Display function ON (checked) or OFF. This
function controls the operation of the Data Display window.
OFF Test result data will be always displayed on the singular Data
Display window even if the test setup is changed.
ON Test result data of the same test setup name will be displayed on the
exclusive Data Display window and the test result data of the
different test setup name will be displayed on the new Data Display
window.
Data Display Manager
This dialog box is opened by selecting the Manage Data Display... function of the
Data Display menu, and is used to control the appearances of the Data Display
windows. This dialog box provides the following three action buttons.
OK Applies the setup changes and closes this dialog box.
Cancel Cancels the setup changes and closes this dialog box.
Apply Just applies the setup changes.
Checked status Unchecked status
Auto Export Auto Record Auto Export Auto Record
ON OFF OFF OFF
ON ON
OFF ON