User`s guide

4- 74 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1

Function Details

Initial Settings

Agilent B1500 is initialized by turning it on, the *RST command, or the device

clear. Initial settings of the B1500 are shown in the following tables.

Table 4-8 Initial Settings

Setup Item Initial Setting

Mainframe Auto calibration off

SMU Output switch close

Filter on

Series resistor, only for HR/MP/HP off

ASU path/indicator SMU side/enable

ASU 1 pA auto range disable

Current measurement range with pulse compliance range

without pulse auto

Voltage measurement range with pulse compliance range

without pulse auto

A/D converter HR/MP/HPSMU: high resolution ADC

HC/DHC/MC/HVSMU: high speed ADC

ADC integration time high speed ADC: auto

high resolution ADC: auto

ADC zero function off

Sweep automatic abort function off

Hold time 0 s

Delay time 0 s

Pulse width 0.001 s

Pulse period 0.01 s