User`s guide

Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1 1- 17
Main GUI
Main Screen
Auto Export ON This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the Auto Export (automatic data export) function is enabled.
Auto Record OFF This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the Auto Record (automatic data record) function is disabled.
workspace name Field below the Results button shows the present workspace name.
Results This button provides the following functions. The list area shows the test records.
The up or down arrow button is used to expand or reduce the list area.
Cancel Closes the menu.
Select All Selects all records.
Unselect All Unselects all records.
Display Data Opens the “Data Display (page 1-84)” and displays the
test result data of the selected record. Up to 15
windows can be opened by this function.
Recall Recalls the test setup of the selected record.
Filter Provides the following four functions.
Show Deleted Data Check this function to see the test records of both
Save-group and Delete-group. To set the data group,
see
“Flag and Remarks” on page 1-19. See also “Test
Result Editor (page 1-23)”.
Filter... Opens the “Test Results Data Filter (page 1-23)” dialog
box. You can filter the test records in the list area.
Expand Application Test
Results
Check this function to see all test records created by the
test setups defined in an application test.
If a test record is exported when this function is not
checked, the exported file will contain all records
created by the test setups defined in an application test.
However, if the test record is exported by the Export
As Text File function, the exported file will contain
only the test record of the application test.