User`s guide

1- 16 Agilent EasyEXPERT User’s Guide Vol. 1, Edition 1
Main GUI
Main Screen
While the “Show Deleted Data (page 1-17)” function is enabled, the list area can
show the test records in Delete-group. For the records, * is set to the column to the
left of the Flag column. The top button sorts the list by *.
Setup Name Shows the test setup name. The top button sorts the test records by name, in
lexicographical order.
Date Shows the date that the test result is recorded. The top button sorts the test records
by date, in chronological order.
Count Shows the measurement count shown in the Count field. The top button sorts the
test records by count, in numerical order.
Device ID Shows the string set to the record by using the Device ID field. The top button sorts
the test records by device ID, in lexicographical order.
Remarks Shows the remarks set to the record. The top button sorts the test records by the
remarks in the lexicographic order.
Thermometer OFF This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the Thermometer is enabled. And one of the following informations is
displayed instead of “Thermometer OFF”. The information is toggled by clicking
the indicator. Where, XX indicates the temperature value.
•T1: XX deg C
Temperature measured by the thermometer channel 1.
•T2: XX deg C
Temperature measured by the thermometer channel 2.
•dT: XX deg C
Difference between temperature values measured by the channels 1 and 2.
Multi Display ON This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the Multi Display function is enabled.
Standby ON This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the standby function is enabled (standby mode is ON).
SMU Zero ON This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the SMU current offset cancel function is enabled.